Page 1 of 1

Morgan carbtune carb balancers

Posted: Fri Oct 31, 2008 6:04 pm
by Sam
I have these morgan carbtune vaccum gauges:

Image

Problem is i lost the attachments that come with it. I need to balance my vfr carbs and having had a look at the carbtune website i dont know which attachments i need to use to balance my carbs. Here's the carbtune page:

http://www.ekmpowershop1.com/ekmps/shop ... ol-9-c.asp" onclick="window.open(this.href);return false;

Anyone know which attachments i need?

Thanks.

Re: Morgan carbtune carb balancers

Posted: Fri Oct 31, 2008 7:07 pm
by vfrhusky
You need the 4 hoses and 4 nylon adaptors (for temp fitting), I think they are 5mm for the VFR, just check by measuring one of the blanking screws. I don't know if you get the thin clear hose with the 4 hoses to make the restricter to stop the guages fluttering.

Re: Morgan carbtune carb balancers

Posted: Fri Oct 31, 2008 8:05 pm
by Neosophist
Morgan sell all the bits on their website

I broguth 4 new nylon hoses (with restrictors) and 4 brass adaptors for £15 delivered about 2 weeks ago

http://www.carbtune.com/" onclick="window.open(this.href);return false;

Click on Order Shopping Cart near the bottom, then Click on Carbtune accessoires.

You want to order 4 x Nitrile Hoses, select the one with the restrictors pipe added (extra £1)

That is £7.00

Then you want to order 4 x 5mm Nylon adaptors for £5.00 (or brass, their more expensive)

Free delivery.

When they come you need to make the hoses.

Cut approx 10cm off the end of each hose, then cut the small plastic pipe into 4 equal sections and join the hoses back together with each little piece.

The part with the join in connects to the engine, the other end connects to the carbtune ^_^

Re: Morgan carbtune carb balancers

Posted: Sun Nov 02, 2008 5:08 pm
by tomski
Has anybody used the 'colourtune' spark plugs from these guys?

Re: Morgan carbtune carb balancers

Posted: Sun Nov 02, 2008 11:08 pm
by Neosophist
Yeah, there really good for a general home tune. (you'll need a gas anaylzer et al to achieve better results)

They dont' do one small enough for the NC30/35 though

Re: Morgan carbtune carb balancers

Posted: Tue Nov 04, 2008 1:18 am
by tomski
I've suggested them to the quad-bike dealership I worked at over summer. We spent a many a fruitless hour adjusting mixture! :oops:

Re: Morgan carbtune carb balancers

Posted: Thu Nov 06, 2008 4:32 am
by Sam
Thanks for the info guys. I think i'll be going for the brass adaptors (£8 ones, spend a bit more for longevity me thinks) and the little clear tubes as mine arent in the best nick.

Re: Morgan carbtune carb balancers

Posted: Fri Nov 07, 2008 1:07 am
by katana
How about the scotoiler adaptors?