Page 46 of 48

Re: What did you do with your NC30/35 today?

Posted: Thu Jun 30, 2016 1:06 pm
by chrisrides
manicguitarist wrote:
When I first read that, I mis-interpreted and though you said "I got a flat spot....turns out the valve stem had perished and split..." (I thought you were referring to an engine valve!!).

Glad you are ok, and that it isn't an engine valve!

:)
Haha thankfully not - I would've been a bit more upset if that was the case!

Re: What did you do with your NC30/35 today?

Posted: Mon Jul 04, 2016 3:00 pm
by speedy231278
Yesterday: did about 100 miles or so recovering the bike from Bournemouth. No repeat of the random fuse incinerating trick! :D

Re: What did you do with your NC30/35 today?

Posted: Wed Jul 06, 2016 1:06 am
by Morespeedvicar
Its taken me just over four years to get fit enough to get back on the nc30, but its back on the road!!!!

It started pretty much on the button an goes and look ace!

Image

Re: What did you do with your NC30/35 today?

Posted: Wed Jul 06, 2016 6:18 am
by chrisrides
The more things I clean/service/fix on this bike, the more I'm convinced it was previously owned by the hulk...

Had to use a big breaker bar to get the rear wheel nut off last week when replacing the valve (must've been at least 50nm tighter than the recommended torque specs).
Then did an oil and filter change a few days ago and spent 20 minutes just trying to get the filter off. It was so tight that the tool actually dented the filter!

Image

Re: What did you do with your NC30/35 today?

Posted: Sat Aug 27, 2016 8:25 pm
by slug675
Started removing paint ready for respray, good news, under the crappy silver paint etc was what I thought was the original SEED paint work. That was until i went a bit deeper and underneath that was the original SEED paintwork. I reckon I will have shed a few kilo's from the bike just in paint and filler alone by the time I'm done. Never seen paint so thick! Also never seen body filler used to repair plastic before, strangely it didn't work :roll:

Re: What did you do with your NC30/35 today?

Posted: Sun Aug 28, 2016 10:04 pm
by manicguitarist
Took the RVF out today, after 5 weeks and 2000miles on my MV Agusta. Did 120miles looning around the Lancashire countryside. Happy days.

The rvf still brings a massive smile to my face. I'll write up a comparison next time I'm at a pic - typing on my iPad - meh. :D

Re: What did you do with your NC30/35 today?

Posted: Mon Aug 29, 2016 8:02 pm
by newtothis
Finished off a servce, oil, new coolant, reshimming valves etc. Having dropped a shim which of course went straight into the sump I also dropped the exhaust off and gave that a clean up, new gaskets etc.

It's amazing how some really shonky looking bits just keep on working
Image
Admittedly this was the worst one...

Having found some pillion peg brackets I also popped them on, proper pins will replace the allen bolts soon.....
Image
....as there's a girl 18 years younger than me who wants to come out on the bike....the things we do for lust eh?

Re: What did you do with your NC30/35 today?

Posted: Mon Aug 29, 2016 8:04 pm
by manicguitarist
:D Your bike could be older than her :grin: ....

Re: What did you do with your NC30/35 today?

Posted: Sat Sep 17, 2016 11:38 am
by VtypeV4
Image

Not today but last week it went round the Nurburgring a few times.. Winner!

Re: What did you do with your NC30/35 today?

Posted: Sat Sep 17, 2016 11:53 pm
by vfrman
Worked on getting the NC30 ready for safety inspection (MOT) and buggered up the headlight adjuster.