What did you do with your NC30/35 today?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
chrisrides
Settled in member
Reactions:
Posts: 13
Joined: Sat Mar 26, 2016 12:00 pm
Bike owned: NC30
Re: What did you do with your NC30/35 today?

Post by chrisrides » Thu Jun 30, 2016 1:06 pm

manicguitarist wrote:
When I first read that, I mis-interpreted and though you said "I got a flat spot....turns out the valve stem had perished and split..." (I thought you were referring to an engine valve!!).

Glad you are ok, and that it isn't an engine valve!

:)
Haha thankfully not - I would've been a bit more upset if that was the case!

User avatar
speedy231278
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 1642
Joined: Tue Jul 03, 2012 11:58 am
Bike owned: RVF400, TZR125, ZXR750R
Re: What did you do with your NC30/35 today?

Post by speedy231278 » Mon Jul 04, 2016 3:00 pm

Yesterday: did about 100 miles or so recovering the bike from Bournemouth. No repeat of the random fuse incinerating trick! :D
Image

Morespeedvicar
Site Supporter
Site Supporter
Reactions:
Posts: 1269
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: What did you do with your NC30/35 today?

Post by Morespeedvicar » Wed Jul 06, 2016 1:06 am

Its taken me just over four years to get fit enough to get back on the nc30, but its back on the road!!!!

It started pretty much on the button an goes and look ace!

Image

chrisrides
Settled in member
Reactions:
Posts: 13
Joined: Sat Mar 26, 2016 12:00 pm
Bike owned: NC30
Re: What did you do with your NC30/35 today?

Post by chrisrides » Wed Jul 06, 2016 6:18 am

The more things I clean/service/fix on this bike, the more I'm convinced it was previously owned by the hulk...

Had to use a big breaker bar to get the rear wheel nut off last week when replacing the valve (must've been at least 50nm tighter than the recommended torque specs).
Then did an oil and filter change a few days ago and spent 20 minutes just trying to get the filter off. It was so tight that the tool actually dented the filter!

Image

slug675
Settled in member
Reactions:
Posts: 45
Joined: Mon Oct 19, 2015 9:27 pm
Bike owned: NC30 / 675SE
Location: Wiltshire
Re: What did you do with your NC30/35 today?

Post by slug675 » Sat Aug 27, 2016 8:25 pm

Started removing paint ready for respray, good news, under the crappy silver paint etc was what I thought was the original SEED paint work. That was until i went a bit deeper and underneath that was the original SEED paintwork. I reckon I will have shed a few kilo's from the bike just in paint and filler alone by the time I'm done. Never seen paint so thick! Also never seen body filler used to repair plastic before, strangely it didn't work :roll:

manicguitarist
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 691
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire
Re: What did you do with your NC30/35 today?

Post by manicguitarist » Sun Aug 28, 2016 10:04 pm

Took the RVF out today, after 5 weeks and 2000miles on my MV Agusta. Did 120miles looning around the Lancashire countryside. Happy days.

The rvf still brings a massive smile to my face. I'll write up a comparison next time I'm at a pic - typing on my iPad - meh. :D

newtothis
Settled in member
Reactions:
Posts: 136
Joined: Mon Jul 07, 2014 10:06 pm
Bike owned: YZF R125, RVF400, Morini 3 1/2
Location: Beds at night
Re: What did you do with your NC30/35 today?

Post by newtothis » Mon Aug 29, 2016 8:02 pm

Finished off a servce, oil, new coolant, reshimming valves etc. Having dropped a shim which of course went straight into the sump I also dropped the exhaust off and gave that a clean up, new gaskets etc.

It's amazing how some really shonky looking bits just keep on working
Image
Admittedly this was the worst one...

Having found some pillion peg brackets I also popped them on, proper pins will replace the allen bolts soon.....
Image
....as there's a girl 18 years younger than me who wants to come out on the bike....the things we do for lust eh?

manicguitarist
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 691
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire
Re: What did you do with your NC30/35 today?

Post by manicguitarist » Mon Aug 29, 2016 8:04 pm

:D Your bike could be older than her :grin: ....

VtypeV4
Familiar Member
Reactions:
Posts: 324
Joined: Sat Jun 27, 2009 10:57 pm
Bike owned: FJ1200 3CV, NC30, CX500
Re: What did you do with your NC30/35 today?

Post by VtypeV4 » Sat Sep 17, 2016 11:38 am

Image

Not today but last week it went round the Nurburgring a few times.. Winner!

User avatar
vfrman
Senior Member
Reactions:
Posts: 2547
Joined: Sat Apr 05, 2008 7:54 pm
Bike owned: NC30, 1098s
Location: Layton, Utah, USA
Re: What did you do with your NC30/35 today?

Post by vfrman » Sat Sep 17, 2016 11:53 pm

Worked on getting the NC30 ready for safety inspection (MOT) and buggered up the headlight adjuster.


Post Reply