any suggestions
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 8
- Joined: Sun Apr 14, 2013 10:51 pm
any suggestions
as in my poor running topic could anyone suggest things to check for my loss of power over 7k before i start buying parts as this is my first bike and am a bit of a novice thanks
- Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: any suggestions
Have you an aftermarket can or pipes? if so carbs may need re jetting as holes and flat spots are common with these mods. Not sure if the 23 has any restriction in the speedo like the 29, maybe search the forum regarding this.
-
- Site Supporter
- Posts: 422
- Joined: Thu Jul 15, 2010 12:59 pm
- Bike owned: NC23 NC30 CRM250
- Location: West Midlands
Re: any suggestions
Have you cleaned the carbs etc - sorry if this is in another thread but i havent read it.
My advice is take it to a dyno - for about £30-£50, you will get an idea if its the carb setup or something else, money well spent if you ask me and saves the cost of buying parts you really dont need to.
My advice is take it to a dyno - for about £30-£50, you will get an idea if its the carb setup or something else, money well spent if you ask me and saves the cost of buying parts you really dont need to.
-
- Settled in member
- Posts: 8
- Joined: Sun Apr 14, 2013 10:51 pm
Re: any suggestions
yea ive got a race can on it but i work 6 days and need somewhere that is open in the north east of england