Page 1 of 1
nc23 fairing/fixings
Posted: Thu Jan 19, 2012 5:33 pm
by DK-Tandy
i took my damaged originals off and not had them on for a while.. ive looked at pictures and there is 3 bolts that hold the centre and lowers together but only 2 1/4 turn bolt holders in the bracket.. where is the other one.. i dont have access to my plastics so i cant look..
is it a clip whihc the bolt screws into or what?
pics would be a great help
Re: nc23 fairing/fixings
Posted: Thu Jan 19, 2012 8:45 pm
by LITTLE=ONE
the back 1/4 turn bolt goes by you knee , by the clutch arm
the middle 1/4 turn bolt goes about where the front down tube goes
and the front 1/4 turn bolt hold the two fairing pieces together , and is just off the picture near the front wheel
is this what you are after
L=O
Re: nc23 fairing/fixings
Posted: Thu Jan 19, 2012 8:51 pm
by DK-Tandy
yeah, but you know the know front one, is the bracket which the 1/4 turn bolt goes into in the lower faring? i cant think how it goes together..
Re: nc23 fairing/fixings
Posted: Sat Jan 21, 2012 1:39 am
by LITTLE=ONE
the two pieces of fairing are clipped together with this
on the belly pan
if you look at the front of the fairing you can see the dzus clip (#336) which is pop-riveted to the belly pan
hope this is what you mean
L=O
p.s original fairing is the same as the race fairing (or at least mine have the same clips in the same position)
Re: nc23 fairing/fixings
Posted: Sat Jan 21, 2012 9:46 am
by DK-Tandy
thats helped alot :)
just what i was after
KARMA coming your way