Page 1 of 2

Aluminium foil on fairings

Posted: Tue Sep 21, 2010 11:04 am
by chownsy
I remember seeing ages ago on a set of fairings someone had stuck aluminium foil to the inside of them to help keep the plastic cool and stop the paint cracking from the engine heat.

A roll of foil is cheap, would you advise doing this to my fairings to help improve there life?

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 12:36 pm
by CRM
its a bi thicker than domestic foil. more like the self stick stuff used to joint plasterboard.

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 12:55 pm
by chownsy
CRM wrote:its a bi thicker than domestic foil. more like the self stick stuff used to joint plasterboard.
I wish i had thought about it before, i could have nicked all the off cuts from the days i worked at marcus sportcars

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 2:26 pm
by Drunkn Munky
That silver stick on insulation foil they sell in B&Q or wickes should do the trick

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 2:50 pm
by chownsy
Drunkn Munky wrote:That silver stick on insulation foil they sell in B&Q or wickes should do the trick

Rightio then, ill have a looksie in there trade catalogue


In screw fix they have Radiator Reflector foil but it has to be glued on :(

We used to use contact adeshive on the car chassis with the heat proof material and then taped the edges.

If i can find the foil tape then i could do the same on this with the reflector stuff as its only £7 for 5m

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 3:14 pm
by Drunkn Munky
Let me know what you decide on as i need to do the fairings on my gsxr before any more paint bubbles up after the so called dream machine didnt refit the heat protection when it was painted :down:

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 3:35 pm
by chownsy
Drunkn Munky wrote:Let me know what you decide on as i need to do the fairings on my gsxr before any more paint bubbles up after the so called dream machine didnt refit the heat protection when it was painted :down:

Just priced it up just under £20 for it, so going to do it and save money having to repaint the paintwork from heat damage.

Screwfix numbers:
35529 - £9.35 - tape
10612 - £6.86 - rad insulation
51081 - £2.99 - adhesive

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 7:35 pm
by porndoguk
chownsy wrote:
Drunkn Munky wrote:Let me know what you decide on as i need to do the fairings on my gsxr before any more paint bubbles up after the so called dream machine didnt refit the heat protection when it was painted :down:

Just priced it up just under £20 for it, so going to do it and save money having to repaint the paintwork from heat damage.

Screwfix numbers:
35529 - £9.35 - tape
10612 - £6.86 - rad insulation
51081 - £2.99 - adhesive
hold your horses kiddo i have some self adhesive foil/insul tape used for pipe laggin,

let me know how much you need and ill dig you some out,

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 7:54 pm
by chownsy
ideally i need to do both side fairings as i dont want my paintwork getting damaged from the heat off the engine.

and thanks for the offer :grin:

Re: Aluminium foil on fairings

Posted: Tue Sep 21, 2010 8:12 pm
by porndoguk
chownsy wrote:ideally i need to do both side fairings as i dont want my paintwork getting damaged from the heat off the engine.

and thanks for the offer :grin:
its the £8.99 thingy youve looked at screwfix,
i have posibly about 10m going spare which should see you fit?