Gerd rads, for nc35 and nc30

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
g-force performance
Familiar Member
Reactions:
Posts: 311
Joined: Thu May 29, 2008 5:58 am
Bike owned: VTR-250, VFR400RR,
Location: Santa Clara County, California, USA
Contact:
Re: Gerd rads, for nc35 and nc30

Post by g-force performance » Wed Dec 31, 2014 5:52 pm

mruehl34 wrote:@marcus
i don´t know if the rads work better than Rick O one, because i did not have any rads from Rick. On a race bike they
work perfect. You can read it on the g-force blog. I used thid rads for over 10 years and i never had a problem with overheating.

Michael
Did I hear my name?

Yes, the Gerd Rads work SUBSTANTIALLY better than any others out there. We started with one set. Now we have 4 sets. To put it in perspective, where the stock rads left our bikes boiling over in the grid, and running around 210-215F on track, the Radtech Rads (I believe these are what Rick O uses - or similar) brought these temps down by about 10-15 degrees. But that was still too hot. The Gerds have never gone above 190F on the hottest of days, and generally run 170-180F all day long on normal days.

Another point of perspective is we literally melted Pistons and destroyed 2 engines with the Radtechs because they still were not enough cooling for our engines. Keep in mind, were pumping 80+HP with the 428cc engines and 93+ with the 450cc engines. And, HP is heat. So, the Getds might be slightly overkill for a stock engine. But, I would rather have too much cooling and apply tape, than wish we had more cooling when looking at a melted down engine.

At the very least, for a stock engine than needs more cooling, run the Rick Oliver Rads. But, if you're racing, or find yourself really overheating at the track, it's time for the Gerds. They are amazing!

User avatar
JC120
Site Supporter
Site Supporter
Reactions:
Posts: 470
Joined: Thu May 17, 2012 5:43 am
Bike owned: NC30 NC35 RC30 RC45 MC22 NXA
Location: Southern California
Re: Gerd rads, for nc35 and nc30

Post by JC120 » Thu Jan 01, 2015 4:32 am

I guess I need them and I don't think that's a bad a price for those. I saw them on the 450cc bike and they're nice. Light years better than the Chinese radiators with the crappy welds and paper thin fins.

Sign me up Michael. I want a set!
V4ia addict

g-force performance
Familiar Member
Reactions:
Posts: 311
Joined: Thu May 29, 2008 5:58 am
Bike owned: VTR-250, VFR400RR,
Location: Santa Clara County, California, USA
Contact:
Re: Gerd rads, for nc35 and nc30

Post by g-force performance » Sun Jan 04, 2015 10:02 pm

Michael. Please put me down for another set. I have another buyer.

Mike Norman
G-Force Engine Development

User avatar
mruehl34
Site Supporter
Site Supporter
Reactions:
Posts: 672
Joined: Wed Apr 30, 2008 8:06 pm
Location: Germany
Contact:
Re: Gerd rads, for nc35 and nc30

Post by mruehl34 » Tue Jan 06, 2015 9:47 am

OK,

everyone who wants a set of rads, pls sent me a pm or an email. I want to order this week.

Michael

panteleimon
Settled in member
Reactions:
Posts: 50
Joined: Sat May 17, 2008 3:10 pm
Re: Gerd rads, for nc35 and nc30

Post by panteleimon » Fri Jan 09, 2015 12:47 pm

Emailed.

Count me in too, please.

User avatar
mruehl34
Site Supporter
Site Supporter
Reactions:
Posts: 672
Joined: Wed Apr 30, 2008 8:06 pm
Location: Germany
Contact:
Re: Gerd rads, for nc35 and nc30

Post by mruehl34 » Fri Jan 09, 2015 5:39 pm

panteleimon wrote:Emailed.

Count me in too, please.
You must have an email too

Michael

panteleimon
Settled in member
Reactions:
Posts: 50
Joined: Sat May 17, 2008 3:10 pm
Re: Gerd rads, for nc35 and nc30

Post by panteleimon » Fri Jan 09, 2015 5:47 pm

mruehl34 wrote:
panteleimon wrote:Emailed.

Count me in too, please.
You must have an email too

Michael
Strange, no email received.
PM?

Cheers

User avatar
mruehl34
Site Supporter
Site Supporter
Reactions:
Posts: 672
Joined: Wed Apr 30, 2008 8:06 pm
Location: Germany
Contact:
Re: Gerd rads, for nc35 and nc30

Post by mruehl34 » Fri Jan 09, 2015 6:46 pm

pm sent.

Michael

User avatar
mruehl34
Site Supporter
Site Supporter
Reactions:
Posts: 672
Joined: Wed Apr 30, 2008 8:06 pm
Location: Germany
Contact:
Re: Gerd rads, for nc35 and nc30

Post by mruehl34 » Sat Jan 10, 2015 6:05 pm

OK i wil order next week.

Michael

User avatar
micpec
Site Supporter
Site Supporter
Reactions:
Posts: 2138
Joined: Sat May 03, 2008 9:11 pm
Bike owned: NC35’s, NC30 sold, MC34 many
Location: The Netherlands
Re: Gerd rads, for nc35 and nc30

Post by micpec » Sat Jan 17, 2015 12:10 am

pm sent.
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"


Post Reply