Help

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
mattydrvf
Settled in member
Posts: 112
Joined: Wed Apr 22, 2009 10:38 pm
Bike owned: Rvf baby
Location: kent

Help

Post by mattydrvf » Sun Jun 13, 2010 8:13 am

Hi guys and girls fitting a new engine suppled by abrmoto (thanks again mate) just remembered when i took the old engine out months ago the small fuel line snapped off from the engine end. Now problem is i fitted new engine and just finished putting air box when i remembered this and for the life of me i cannot remember where the small line meets the engine or carbs. Can anyone let me know where this should go as i have a feeling its airbox and carbs off job again. Maybe a picture if anyone has one. many thanks in advance matt.

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: Help

Post by Neosophist » Sun Jun 13, 2010 2:00 pm

Do you mean the vaccumn tap hose from your fuel tank

It goes onto a little spigot on one of the cylinders, not sure which one on the NC30 but you should be able to get to it without taking the carbs / airbox off :)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

User avatar
superlite
Site Supporter
Site Supporter
Posts: 748
Joined: Wed Apr 30, 2008 11:52 pm
Bike owned: TLS, LB80 x 2
Location: Australia
Contact:

Re: Help

Post by superlite » Sun Jun 13, 2010 2:09 pm

Usually cylinder No. 3 [or 4].
'Take it to the Back'

mattydrvf
Settled in member
Posts: 112
Joined: Wed Apr 22, 2009 10:38 pm
Bike owned: Rvf baby
Location: kent

Re: Help

Post by mattydrvf » Sun Jun 13, 2010 6:34 pm

Thankyou all found now

Post Reply