Page 1 of 1
NC35 Caliper conversion?
Posted: Mon Mar 22, 2010 11:40 pm
by matt_nc30
hi i cant seem to find any brackets for a caliper conversion on an NC35, for the brembo calipers with 65mm mounting centres for instance
Are they available to buy like they are for the NC30?
Cheers
Re: NC35 Caliper conversion?
Posted: Tue Mar 23, 2010 2:21 pm
by micpec
Hi there, no brackets can be had to fit 65mm calipers on the NC35. Unlike for NC30 as Rick Oliver can supply these. There are adapters/brackets to fit 40mm brembo's on NC35, but are rarely used.
Re: NC35 Caliper conversion?
Posted: Tue Mar 23, 2010 2:45 pm
by matt_nc30
Ok thanks for reply man.
Re: NC35 Caliper conversion?
Posted: Tue Mar 23, 2010 8:52 pm
by Cammo
Easy swap is to just bolt on 03-04 600rr / SP1 calipers to the rvf.
Not quite the bling of the brembos but nice bits of gear all the same.
Re: NC35 Caliper conversion?
Posted: Sat Mar 27, 2010 10:11 pm
by matt_nc30
Can i keep my NC30 wheel if i fit 35 forks??
& are the CBR600RR/SP1 calipers a straight swap on the NC35 Forks?
Cheers
Matt
Re: NC35 Caliper conversion?
Posted: Sun Mar 28, 2010 12:25 am
by Cammo
matt_nc30 wrote:Can i keep my NC30 wheel if i fit 35 forks??
Yes.
& are the CBR600RR/SP1 calipers a straight swap on the NC35 Forks?
Yes.