poo poo.....had a mini hi-side...argghhh!

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
powerbio
Settled in member
Posts: 68
Joined: Wed Apr 30, 2008 11:56 pm
Location: gloucestershire

poo poo.....had a mini hi-side...argghhh!

Post by powerbio » Wed Jan 27, 2010 7:31 pm

hi all

took my bike out yesterday just to have a blast.....pulled off my friends drive...as i was straightening up i opened the bike up a little...wooshhhh..back end stepped out, i was flung off and the bike slid along the road!

ive got a AC joint dislocation from my mma training.....it was healing but i landed on that side so its hurting like hell again.

with regards to the bike...ive broken my left mirror (carbon fibre teat drop £45).....my alloy clip-on bent (£20 for a pair from rick oliver).... rear set peg broke (cheapest found £22 for pair) and my pazzo lever has been bent ever so slightly and ground away...so ill be sanding it down then finish with some wet/dry for it to be re-anodized. only a very small scuff on belly pan.

so looks like all will be fine after a small amount of time and money spent.

Spike16
Site Supporter
Site Supporter
Posts: 1670
Joined: Tue Apr 29, 2008 8:56 pm
Bike owned: NC30 Road, SV650 Race
Location: Hampshire, Wichester

Re: poo poo.....had a mini hi-side...argghhh!

Post by Spike16 » Wed Jan 27, 2010 7:40 pm

Hey if you need a new set of those bars I can get you a pair for £10

User avatar
Riley
Site Supporter
Site Supporter
Posts: 228
Joined: Wed Apr 30, 2008 7:53 pm
Location: Gloucester

Re: poo poo.....had a mini hi-side...argghhh!

Post by Riley » Wed Jan 27, 2010 8:13 pm

Rubbish! Done yourself any harm Duncan? I'm guessing you won't be able to come training on Sunday? I hope you can still make it, One of our lads has organised an instructor from Trojan (Cheltenham) to come down to take the session. On the bike front if you need any help just give me a shout.
Need any used Nc30 parts? Want to fit a Ducati front end to your Nc30? If so give me a shout.

powerbio
Settled in member
Posts: 68
Joined: Wed Apr 30, 2008 11:56 pm
Location: gloucestershire

Re: poo poo.....had a mini hi-side...argghhh!

Post by powerbio » Wed Jan 27, 2010 8:21 pm

hi guys...

are the bars solid or tubular?

paul my collar bone isnt good at all mate and my neck is sore to touch...so looks like sunday will be a no go!.ffs!!
thank you for the offer though...what time is it going on?....might come watch!

most of the parts will be replaced so no problems..just a little work on the lever but should be fine...ill finish the other small jobs on it too.....then its the just a case of putting my new main jets in...and finally a good clean and it will be sorted! i hope! lol

User avatar
Riley
Site Supporter
Site Supporter
Posts: 228
Joined: Wed Apr 30, 2008 7:53 pm
Location: Gloucester

Re: poo poo.....had a mini hi-side...argghhh!

Post by Riley » Wed Jan 27, 2010 8:31 pm

Oh well, these things happen I suppose at least you got off (quite) lightly by the sounds of it. To be fair you love tinkering with the bike so it gives you an excuse to get back out in the garage! ;) We should be kicking off at about 6 if you want to pop down anyway, all the best Paul.
Need any used Nc30 parts? Want to fit a Ducati front end to your Nc30? If so give me a shout.

Spike16
Site Supporter
Site Supporter
Posts: 1670
Joined: Tue Apr 29, 2008 8:56 pm
Bike owned: NC30 Road, SV650 Race
Location: Hampshire, Wichester

Re: poo poo.....had a mini hi-side...argghhh!

Post by Spike16 » Fri Jan 29, 2010 6:37 pm

their tubular with turned down nylon bungs in the end, pm replied to also

dx400r
Site Supporter
Site Supporter
Posts: 307
Joined: Mon Aug 25, 2008 1:41 pm

Re: poo poo.....had a mini hi-side...argghhh!

Post by dx400r » Fri Jan 29, 2010 10:15 pm

gutted mate, I know how it feels. Sort yourself and then your bike :)

Post Reply