Advice on NC30 Front Brake discs.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
eltel
Site Supporter
Site Supporter
Reactions:
Posts: 49
Joined: Fri May 02, 2008 12:04 pm
Location: Wishaw, North Lanarkshire.
Advice on NC30 Front Brake discs.

Post by eltel » Fri May 02, 2008 1:07 pm

Hi there, I'm looking for a pair off new front discs for my ride, but I'm not to sure what are best in regards to quality. Does anyone know anything about this selection :?:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=003
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=023
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=024
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=007
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=004

Thanks Terry.
If you can't get it up them, then get it down them.

User avatar
CMSMJ1
Moderators
Moderators
Reactions:
Posts: 7150
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Advice on NC30 Front Brake discs.

Post by CMSMJ1 » Fri May 02, 2008 1:24 pm

Hey Tel,

I bought some Stealth wavy discs for my bike and they are great. Work very well, are very light and were made in Sheffield...so I visited them and had a crack. nice guys and worth spending your cash on British products.

cannot see your links at work so canont comment at all on your other stuff!

cheers
MARK

btw - go delete that duplicate post dude ;)
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

RVF
Settled in member
Reactions:
Posts: 111
Joined: Wed Apr 30, 2008 8:22 pm
Location: Cornwall, England
Re: Advice on NC30 Front Brake discs.

Post by RVF » Fri May 02, 2008 4:01 pm

You can also use brembo disks off an RS250R Honda as these are a direct replacment. '90-'92 model.

User avatar
eltel
Site Supporter
Site Supporter
Reactions:
Posts: 49
Joined: Fri May 02, 2008 12:04 pm
Location: Wishaw, North Lanarkshire.
Re: Advice on NC30 Front Brake discs.

Post by eltel » Fri May 02, 2008 6:02 pm

Cheers Mark, What duplicate post are you meaning. It could be that i have posted twice to say cheers for the new forum. The first post got removed & i had to register again :!: , so i posted again. I'm confused now :? Would you have a link for those stealth's & are they the same as the ones for sale at Jap4 :?:

Thanks Terry PS got those levers and renthal med grips & saved a few quid. Thanks :D
CMSMJ1 wrote:Hey Tel,

I bought some Stealth wavy discs for my bike and they are great. Work very well, are very light and were made in Sheffield...so I visited them and had a crack. nice guys and worth spending your cash on British products.

cannot see your links at work so canont comment at all on your other stuff!

cheers
MARK

btw - go delete that duplicate post dude ;)
If you can't get it up them, then get it down them.

User avatar
Smev
Site Supporter
Site Supporter
Reactions:
Posts: 858
Joined: Tue Apr 29, 2008 8:54 pm
Bike owned: NC30 of course
Location: The Mighty Cornwall :-)
Re: Advice on NC30 Front Brake discs.

Post by Smev » Sat May 03, 2008 7:34 am

I'm going to be selling my front discs soon - they are stealth wavy ones and are awesme!!
They look real trick too!
I haven' done too many miles on them at all, its just that i'm going to be fitting a ducati 749 front end and wheel so basically the whole front end will be for sale!
let me know if you are interested!!!
cheers smev 8-)
Mister Donut Rep NC30

User avatar
eltel
Site Supporter
Site Supporter
Reactions:
Posts: 49
Joined: Fri May 02, 2008 12:04 pm
Location: Wishaw, North Lanarkshire.
Re: Advice on NC30 Front Brake discs.

Post by eltel » Sat May 03, 2008 8:33 am

Mail Sent.
Smev wrote:I'm going to be selling my front discs soon - they are stealth wavy ones and are awesme!!
They look real trick too!
I haven' done too many miles on them at all, its just that i'm going to be fitting a ducati 749 front end and wheel so basically the whole front end will be for sale!
let me know if you are interested!!!
cheers smev 8-)
If you can't get it up them, then get it down them.


Post Reply