CBR400RR exhaust thread

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Wozza
Site Supporter
Site Supporter
Reactions:
Posts: 629
Joined: Wed Aug 06, 2008 9:51 pm
Re: CBR400RR exhaust thread

Post by Wozza » Tue Dec 01, 2009 6:53 pm

Cool, thanks mate :smile:

tanuki
Site Supporter
Site Supporter
Reactions:
Posts: 1571
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K
Re: CBR400RR exhaust thread

Post by tanuki » Wed Dec 02, 2009 1:04 pm

Yakama wrote:Why not HRC? Whats different about this one then?

By the way it seperates into more sections than shown in the pic there
This is a HRC system for the NC23 as we said earlier (11 Piece)

Image

and this is your one (7 piece)

Image

as you can see on the HRC system just under the part that attaches to the head you can see that it is a seperate piece held on by springs...unfortunatly yours does not have this.

you can also see that the welds are diferent on the lower pic.

User avatar
Yakama
Site Supporter
Site Supporter
Reactions:
Posts: 1369
Joined: Wed Apr 30, 2008 5:27 pm
Bike owned: NC23s, 29, 30s, MC16
Location: Oban
Re: CBR400RR exhaust thread

Post by Yakama » Wed Dec 02, 2009 5:44 pm

Cheers Tanuki,

It does have a separate part that attaches to the head, the collars are held on by springs. Do you think it is just a slightly different design take on an HRC system?

User avatar
Cammo
Site Supporter
Site Supporter
Reactions:
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: CBR400RR exhaust thread

Post by Cammo » Thu Dec 03, 2009 7:28 am

tanuki wrote: This is a HRC system for the NC23 as we said earlier (11 Piece)

Image
I don't believe that is an hrc system looking at it now. All the hrc systems of the era are 'mandrel' bent mild steel, and don't use welded sections for any individual part. The system above is press bent, the bent areas aren't circular.

I think that Yakama's system looks very similar to a typical hrc exhaust (virtually identical construction to my hrc nc30 system), hard to be 100% sure that is is though as it looks different to the nc23 version.
Last edited by Cammo on Thu Dec 03, 2009 7:31 am, edited 1 time in total.
"It's just a ride" Bill Hicks

greggo
Site Supporter
Site Supporter
Reactions:
Posts: 444
Joined: Wed May 14, 2008 1:08 pm
Re: CBR400RR exhaust thread

Post by greggo » Thu Dec 03, 2009 7:31 am

Mine looks like that Dataracer, and is made by TSR i'm led to believe.

racesupplies
Familiar Member
Reactions:
Posts: 285
Joined: Tue Jan 05, 2010 11:42 am
Re: CBR400RR exhaust thread

Post by racesupplies » Wed Jan 13, 2010 11:37 pm

So where can I get a titanium race system that will clear a big rad.

User avatar
royster81
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: CBR400RR exhaust thread

Post by royster81 » Sat Jan 16, 2010 1:45 pm

anyone any idea what this baby is ?
http://cgi.ebay.co.uk/HONDA-CBR400-exha ... 5636abd577" onclick="window.open(this.href);return false;
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....

GF Racing
Site Supporter
Site Supporter
Reactions:
Posts: 350
Joined: Tue Apr 08, 2008 8:52 am
Re: CBR400RR exhaust thread

Post by GF Racing » Sat Jan 16, 2010 5:18 pm

Carl,

That SS exhaust you turned down last week (still here after all) will clear a big rad - however it came off an NC29 with 2 nice ally rads - 1 top - 1 bottom - all rather trick.

Plus I have now got the special end can back from being completely rebuilt - new carbon sleeve / packing / strap / clamp etc.

Rads. need a little welding to the brackets where they have cracked - but all very usable.

£500 for the lot - that is the 2 ally rads. and all the plumbing - the race system and the reconditioned end can.

UK delivery £25
Graeme France - GF Racing UK
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com

racesupplies
Familiar Member
Reactions:
Posts: 285
Joined: Tue Jan 05, 2010 11:42 am
Re: CBR400RR exhaust thread

Post by racesupplies » Sun Jan 17, 2010 12:30 am

Thats tempting Graeme,I didnt mean to turn it down.Mark Hornsey rang and said he was sending the exhaust that went with the motor.I am a bit obsessed with weight,thought the Beet was the way to go.I might come up to the Humber to do a trial in the near future with North Lincs,how long are you in UK for.Think a proper chat might be worthwhile,if the pipe etc is still about I could call in.I will have a look at the trials diary,I often come past Brigg.Thanks for getting back,cheers Carl.

PARUS
Senior Member
Reactions:
Posts: 1160
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Re: CBR400RR exhaust thread

Post by PARUS » Sun Jan 17, 2010 12:56 am

Who saw this one... are this really gullarm exhaust..

http://cgi.ebay.co.uk/honda-cbr-400-rr- ... _500wt_1182


Post Reply