Fairly easy to whip the carbs off, should even be able to fish them out without removing the throttle cables etc.
One tip however is to make sure the inlet rubber clamps are undone properly, wrenching out carbs can quite easily split the plastic T-junctions on the carbs through twisting.
Ive seen a lot of people do this and it's easily avoidable with a bit of care and a few more turns of the screwdriver on the inlet clamps!
Good luck
NC29 Restrictor removals
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
micklewright
- Settled in member
- Posts: 49
- Joined: Wed Dec 09, 2009 4:14 pm
- Bike owned: RSV 1K, CB600, GSXR X2 TRACK
- Location: Bristol, UK