Building seat up
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Honda_Star
- Settled in member
- Posts: 12
- Joined: Mon Mar 23, 2009 8:07 am
Building seat up
I want my seat to be slightly higher, is there anyway i can buy a thicker seat or build the existing one up a bit?
-
rob
- Settled in member
- Posts: 73
- Joined: Thu May 22, 2008 5:23 pm
- Location: near mansfield
Re: Building seat up
Strip the covering and foam off the old one, stick new thicker foam on the seat base, shape it and recover.
-
greggo
- Site Supporter
- Posts: 444
- Joined: Wed May 14, 2008 1:08 pm
Re: Building seat up
Might not be much help, but a lot of the racers here bolt/weld/hoseclip a piece of 12x12mm box section steel on the subframe where the seat rests.
You can still get the bolt through the tank and use zip ties around the lugs on the back of the seat to secure it.
I ran mine like that in the first year before I put on the tyga bodywork.
You can still get the bolt through the tank and use zip ties around the lugs on the back of the seat to secure it.
I ran mine like that in the first year before I put on the tyga bodywork.