NC 31 Crash Protectors
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Graham04
- Settled in member
- Posts: 11
- Joined: Mon May 29, 2017 3:45 pm
NC 31 Crash Protectors
Crash Protectors or bungs, sliders . Lots of names for them. Anyway they are about £58 a set on ebay for my 92 NC31. I bought a set for a 98 Hornet 600 at £29 . The 130mm bolts are too short so 2 M10 180mm allen bolts £4 , and a stack of about 7 washers on each side to space the bungs out from the frame and hey presto a set for £33. I also fitted a couple of nyloc nuts instead of the ones supplied. Ok they may not be R&G but will save the bike in a slow spill or as in my case, just falling over. The Hornet bungs can be found for about £15 from China if need be.