Hi
Just got me a Nc35 with a Nitron aftermarket shock. It seems rather high so i assume it's been raised in the rear. It's possible to change the length of the shock.
I just need to know the standard nc35 shock length. Tried the search but couldn't find anything.
Can anyone help?
Could somebody with a stock shock measure the length from the middle of the rear axle to a point on the rear or something?
Tkanks in advance :)
Kind regards
Martin
Nc35 shock length
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
paasker
- Settled in member
- Posts: 69
- Joined: Sat May 03, 2008 11:00 am
- Bike owned: Aprilia RS125 Tuono, NC29 race
- Location: Denmark
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: Nc35 shock length
Most aftermarket shocks are longer in length, some are adjustable in length some are not but it should be pretty obvious if it is. Stock shock is 305mm i think and i usually set mine (aftermarket) to 310mm.
-
paasker
- Settled in member
- Posts: 69
- Joined: Sat May 03, 2008 11:00 am
- Bike owned: Aprilia RS125 Tuono, NC29 race
- Location: Denmark
Re: Nc35 shock length
My shock is adjustable. Thanks for the measurements :)