NC30 Lock Set

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
sil3nt
Settled in member
Posts: 93
Joined: Fri Jun 25, 2010 7:31 am
Bike owned: GPX 250, NC30
Location: New Zealand

NC30 Lock Set

Post by sil3nt » Sun Jan 27, 2013 4:36 am

Someone tried to take my bike and have stuffed the ignition so can't even get the key in. Anyone got any experience with aftermarket ignitions/lock sets?

I see ebay has chinese locksets for cheap while some places just have the ignition for sale but they tend to cost a bit more.

Don't really want to buy until I can be sure they are good!

User avatar
V4beermonster
Site Supporter
Site Supporter
Posts: 411
Joined: Thu Sep 08, 2011 7:44 pm
Bike owned: Vfr400,gt750,vfr400/750cc
Location: telford shrops
Contact:

Re: NC30 Lock Set

Post by V4beermonster » Sun Jan 27, 2013 8:20 am

I have the Chinese set fitted to mine the only problem was the loom from the on ignition was too short so unsoldered it and soldered the original loom back on and works fine

User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia

Re: NC30 Lock Set

Post by Cammo » Mon Jan 28, 2013 1:02 am

I have a chinese ignition lock, plugged straight in and never gives problems.
"It's just a ride" Bill Hicks

User avatar
V4beermonster
Site Supporter
Site Supporter
Posts: 411
Joined: Thu Sep 08, 2011 7:44 pm
Bike owned: Vfr400,gt750,vfr400/750cc
Location: telford shrops
Contact:

Re: NC30 Lock Set

Post by V4beermonster » Thu Jan 31, 2013 8:27 am

have you got the link Cammo?

User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia

Re: NC30 Lock Set

Post by Cammo » Thu Jan 31, 2013 8:57 am

I don't sorry mate it was bought a couple of years ago.

Make sure the pics of the plug match up to what you need so you at least have case for refund if something different turns up.
"It's just a ride" Bill Hicks

sil3nt
Settled in member
Posts: 93
Joined: Fri Jun 25, 2010 7:31 am
Bike owned: GPX 250, NC30
Location: New Zealand

Re: NC30 Lock Set

Post by sil3nt » Thu Jan 31, 2013 9:14 am

Will probably try my luck with this http://www.ebay.com/itm/HONDA-VFR400-NC ... es&vxp=mtr

Rather annoying I have to do it really.

Post Reply