r6 reg/rec spacing
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
r6 reg/rec spacing
Hi can anyone confirm if the r6 regulater hole spacing is the same as the nc29s. Reason in buying a mosfet unit from electrex and the r6 version appears to have a similar connector as the nc29s, unlike the one they have listed for the nc which is totally different.
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: r6 reg/rec spacing
The hole spacing is different. I just hold the r6 unit on with 1 bolt, it won't go anywhere if you use a lock nut on the back.
"It's just a ride" Bill Hicks
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: r6 reg/rec spacing
Yep thanks. I did just go ahead and buy one anyway as i didnt get a reply but needed to sort it while i had some cash.
Cheers
dave
Cheers
dave