Removal of haft from bottom yoke

chownsy · Post by **chownsy** » Sun Apr 08, 2012 1:12 pm

As per title, How do you remove the shaft out of the bottom yoke as im sending the yokes off with the frame for powder coating.

Post by **porndoguk** » Sun Apr 08, 2012 4:15 pm

chownsy wrote:As per title, How do you remove the shaft out of the bottom yoke as im sending the yokes off with the frame for powder coating.

you dont it will need masking.

chownsy · Post by **chownsy** » Sun Apr 08, 2012 4:25 pm

ah thanks, Guess ill be sending my NC21 ones off instead then as i tried to push it out with the press and bent the thread

Lucky that the NC21 and NC24 bottom yokes i have are identical

Chrissy_J · Post by **Chrissy_J** » Sun Apr 08, 2012 4:49 pm

The steering shaft will have been welded into the bottom yoke. To remove it requires the removal of the weld- and it's rewelding afterwards... not something to consider with a refinished yoke.

Mask it off instead, as stated above.

Removal of haft from bottom yoke

Removal of haft from bottom yoke

Re: Removal of haft from bottom yoke

Re: Removal of haft from bottom yoke

Re: Removal of haft from bottom yoke