david silver nc24 colector box on a 21

[john21z]

David silver states that u can fit thar new stain less colector box. With out droping the engine out
how is this possable .And if so do u think it would be a good idea to fit this on my nc 21 and eather get some one to boge it to fit my silencer in stainless steel or fit a nc24 systerm . And also which would work out cheaper in theory.

paying a bike shop to fit a standard system ie drop engine out

or the new stainless and boge
ps only concidering paying bike shop because its a big job and my tool are limited and so is my knowlage of this
bike. And i dont wont to make a balls ov it because it my only means ov trasport yes im bike only no car.

[gissmo50]

replacing it yourself isnt a hard job if you take your time and be careful if you have a friend help to move the engine its alot easier you could do it in a day with no problem. i have a guide from somewhere might have been here on removing the 24 engine its step by satep and very helpful if you want a copy pm your email then make you mind up on weather to do it but its gonna cost you a fair amount to have a garage do it, also i would keep your eye out for a 24 exhaust rather than a 21 exhaust but you will either need a bracket made to hold it at the can or the 24 rear foot rest hangars, i may have a standard 24 exhaust can depending on weather the missus is willing to part with it not fantastic condition but it work depending on where you are...........