hi guys i have recently purchased an NC23 and my high beam wont work when i press to put it on it jus puts sidelights on and cuts main beam
any ideas
checked all bulbs and fuses etc
high beam not working
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
bnnunn1
- Settled in member
- Posts: 29
- Joined: Tue May 24, 2011 1:35 am
- Bike owned: CBR 400 nc23
- Location: Northampton
-
Wozza
- Site Supporter
- Posts: 629
- Joined: Wed Aug 06, 2008 9:51 pm
Re: high beam not working
Are they H4 bulbs? If so, sounds like your switchgear is burnt out.
-
bnnunn1
- Settled in member
- Posts: 29
- Joined: Tue May 24, 2011 1:35 am
- Bike owned: CBR 400 nc23
- Location: Northampton
Re: high beam not working
yh how do i sort the switchgear bud
-
Wozza
- Site Supporter
- Posts: 629
- Joined: Wed Aug 06, 2008 9:51 pm
Re: high beam not working
Replace it - contact Graeme France, gfracingtw@live.co.uk
Also replace the bulbs with Japanese ones otherwise you'll get the same problem again. Also available from Graeme. There is a mod you can do if you wish to use H4s, search the forum.
Also replace the bulbs with Japanese ones otherwise you'll get the same problem again. Also available from Graeme. There is a mod you can do if you wish to use H4s, search the forum.
-
DK-Tandy
- Familiar Member
- Posts: 482
- Joined: Thu Aug 19, 2010 1:52 am
- Bike owned: CBR400RR NC23
- Location: West Bromwich UK
- Contact:
Re: high beam not working
i have a britsh bulb in mine, contact Porndog about the bulbs as he fitted them in mine (uk bulbs). ( The UK bulbs are brighter :) )