NC30 OEM screen

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
aaron0288
Settled in member
Posts: 140
Joined: Wed Apr 30, 2008 5:28 pm
Bike owned: NC30
Location: Beccles, Suffolk

NC30 OEM screen

Post by aaron0288 » Wed Apr 20, 2011 8:22 pm

My new NC has the original screen on it, and from my experience of trying to get it off at the weekend, I can see why.

The screen bolts have flat heads, don't screw out, and don't push out. I am at a complete loss as of how to get them off!

If they are in fact the original screen bolts, does anyone have any experience of getting the bloody things off?
Top
User avatar
BillingCBR
Site Supporter
Site Supporter
Posts: 1043
Joined: Sat Oct 10, 2009 10:36 pm
Bike owned: '88 NC23, NC30, '98 R1, NC35

Re: NC30 OEM screen

Post by BillingCBR » Wed Apr 20, 2011 9:31 pm

I think they're single use, I got a pair of side cutters, nipped all of the inside tips off, then squashed them with a pair of normal pliers. Then slid a thin flat bladed screw driver under the washer and popped them off too :)
'89 CBR400RRJ and '91 VFR400R NC30 project
Neosophist - The NC30 doesn't go very well when it's on fire
Top
User avatar
Hadies
Site Supporter
Site Supporter
Posts: 606
Joined: Tue Mar 16, 2010 1:20 am
Bike owned: NSR125, NC30, Daytona 675
Location: Washington, Tyne and Wear

Re: NC30 OEM screen

Post by Hadies » Wed Apr 20, 2011 10:33 pm

They're riveted on. I'd suggest drilling them out with a thin drill bit.
Top
Post Reply

Return to “Honda - General”