NC30 lower cowl mount points

[bxtra]

Hi all,

I am currently working on a previously badly bodged NC30. A lot of the stock fairing mount brackets have been removed and replaced with mecano to fit some poor Tyga lookalike knock-offs. I have bought a set of Tyga T10 plastics (uses stock mount points), but in order to fit I have had to buy a new subframe and side stand off eBay, and fairing spacers (£18 from Carward Race Engineering - cheers guys!).

Having had a good scour of the fiches on http://www.cmsnl.com I can't tell if I need anything additional to mount the lower cowl from the right hand side of the bike beneath the step. Does anyone know or, better still, have a photo of how the lower cowl fits to the lower RH side on a stock NC30?

Any help would be appreciated, and I'll post up the finished product for verdict when its done.

Cheers

[Dynamohum]

there should be a bracket aprox 100mm long that bolts onto the frame for the lower r/h side mount cannot see it on the parts fiche but someone should have one spare if yours is missing

[bxtra]

It would seem to be yeah. So if anyone out there has one, or knows the part number, I'd be hella grateful

[arsey30]

It is item 22 on the cowl parts picture, but not available.
It also holds the water overflow hose.

Dave.

[kostritzer]

I ordered one from David Silver Spares, took about a month to get to me, but I'm in the US. Just cut and paste the part number into their search and order it up.