track bike so far

The Dark Prince · Post by **The Dark Prince** » Mon Oct 11, 2010 2:29 pm

Hi
the NC30 is just getting better on the track here are the mods so far
Fuel pump
Ram air ( now done properly)
RVF carbs
Honda clutch friction plates and steels ( let go flat out up clayhill)
Full dyno and mini service at BMC - Witchurch - top bloke - 63 at the wheel 14k revs
Spark plugs changes to 10's
Total loss mod.

Next jobs

Respray - being done now in Gulf colours
Fit 17 inch wheel and get sticky tyres
Fit set of wets to the 18 inch set

Possible lighweight rear subframe and fuel tank pending budget.

Post by **Neosophist** » Mon Oct 11, 2010 2:44 pm

Sounds good fella.

Have you considered the K7 Generator mod instead of total-loss?

Will do away with the need to keep recharging the bike!

The Dark Prince · Post by **The Dark Prince** » Mon Oct 11, 2010 4:17 pm

Hi
Total loss is OK for me, it;s is plugged into a trickle charger and the battery lasts a full track day anyway,

carry a power pack in the boot just in case

Looking forward to getting the bodywork back next week

Post by **Neosophist** » Mon Oct 11, 2010 5:08 pm

Do you still have the flywheel on the engine?

The K7 rotor ways a shed load less :)

The Dark Prince · Post by **The Dark Prince** » Mon Oct 11, 2010 5:51 pm

no fly wheel gone,
Just got hold of light weight rear sub frame and i know where i can get a 7.5l light fuel tank
Got a few new cutting disks for my dremel, next weekend will be a fun one

RoninZX-10R · Post by **RoninZX-10R** » Mon Oct 11, 2010 10:24 pm

When/if you do purchase the 7.5lt fuel tank, could you please take plenty of photos. I'm very interested in making one myself, or if the price is right I might just buy one and save myself some heartache at having to re-do everything 10 times...welding skills are nothing to be proud of

track bike so far

track bike so far

Re: track bike so far

Re: track bike so far

Re: track bike so far

Re: track bike so far

Re: track bike so far