does anyone know *IF* the front and rear wheel bearings are the same diameter/size etc?
bought a set of front and rear off ebay, just arrived all 4 loose ina bag with no label to say front/rear. they "look" the same....
dont fancy knocking the old ones out until i know for sure as bike is only transport now.
NC29 wheel bearings
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: NC29 wheel bearings
Do they have a code on them ???
Ask the seller
Ask the seller
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: NC29 wheel bearings
6004RS
why ask seller when they are the ones that sent them! i am checking if they have made an error so that if i do need to phone them i can tell them there is an error!
why ask seller when they are the ones that sent them! i am checking if they have made an error so that if i do need to phone them i can tell them there is an error!
-
zul_cbr
- Settled in member
- Posts: 199
- Joined: Mon May 26, 2008 1:39 am
- Bike owned: 1990 CBR400RR-L NC29
- Location: Malaysia
- Contact:
Re: NC29 wheel bearings
6004 should be the correct size but surely it wont be loose to fit them.does anyone know *IF* the front and rear wheel bearings are the same diameter/size etc?
are you sure the size is written on the bearing itself ?
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: NC29 wheel bearings
loose to fit them?
sorry lost me on that one.
6004 is stamped in to the side of the "sealed" part of the bearings.
dug out my microfiche and checked the part numbers/qty. yes they are the same.
sorry lost me on that one.
6004 is stamped in to the side of the "sealed" part of the bearings.
dug out my microfiche and checked the part numbers/qty. yes they are the same.
-
GF Racing
- Site Supporter
- Posts: 350
- Joined: Tue Apr 08, 2008 8:52 am
Re: NC29 wheel bearings
Ensure you buy DDU or 2RS bearings i.e. double sealed - other wise any debris inside the wheel will quickly kill a single sealed bearing - save £2 waste a load.
Graeme France - GF Racing UK
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com
UK Warehouse 01652 650142
GF Mobile 07778 628448
email: gfracingtw@live.co.uk
http://www.gfracinguk.com
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: NC29 wheel bearings
yep they are double sealed.
rear bearings now in. will do the fronts when i get the wheel off next time round.
BTW.. whacking your thumb with a mallet when the drift slips off the bearing edge HURTS LIKE HELL!...
rear bearings now in. will do the fronts when i get the wheel off next time round.
BTW.. whacking your thumb with a mallet when the drift slips off the bearing edge HURTS LIKE HELL!...
-
justmartyn
- Site Supporter
- Posts: 198
- Joined: Sun May 04, 2008 4:57 am
- Bike owned: Only 2 left.....
- Location: Northern Ireland and the Middle East
Re: NC29 wheel bearings
Dont do it then...............