Can I have the dims for a 29
I think the dia is 295 ???
What's the offset or the dimesion between the discs.
are other hondas discs interchangable, if so which ones ... hornet maybe
Ta luvs
Front Brake Disc dimensions
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
-
jac_is_smiling
- Settled in member
- Posts: 65
- Joined: Mon Jan 19, 2009 5:39 pm
- Bike owned: Cagiva Planet, NC23 x2, FZ 600
- Location: Glasgow
Re: Front Brake Disc dimensions
Afaik most of the late 80's early 90's honda discs are compatable. NC23, NC29, NC30, and NC35 are all the same for sure, as I currently have discs from an NC30 from ebay on the NC23.
Possibly VFR750FR(94-97), CBR600FS (95-98), and CBR900 (94-97) discs are the same, quite unsure about these ones right enough, Ive got it scrawled down on a bit of paper in my toolbox. Not sure where I got the info
Interwebs somewhere I assume, but id check on them to be sure.
Possibly VFR750FR(94-97), CBR600FS (95-98), and CBR900 (94-97) discs are the same, quite unsure about these ones right enough, Ive got it scrawled down on a bit of paper in my toolbox. Not sure where I got the info
Interwebs somewhere I assume, but id check on them to be sure.
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Front Brake Disc dimensions
Some fireblades and the vt1000 too.
I bought a pair of Dymag wheels with a view to fi them to my FZR so I'll fit up some old discs to see what I get then work out where to go from there.
Not so sure about the rear wheel, it might need the brake hanger modified ... but we'll see.
I bought a pair of Dymag wheels with a view to fi them to my FZR so I'll fit up some old discs to see what I get then work out where to go from there.
Not so sure about the rear wheel, it might need the brake hanger modified ... but we'll see.