Hi, lately I have noticed a very light leak coming from the petrol tap on my bike, it seems to be coming from the top of the tap where it screws into the tank. I tried tightening it up but it does seem to be there, especially after I fill the tank, I have tried cleaning the threads and even used some threadlock to no avail. Im assuming there is a o ring of sorts where the tank mates with the tap (forgot to look). So does anyone know what I would need to stop this leak or better still if there is a part number for the part I imagine is there. cant look at the fiche at the moment as Im at work. Other than a new part what would be the best course of action, such as a sealant etc.
dave
fuel tap leak
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
-
BillingCBR
- Site Supporter
- Posts: 1043
- Joined: Sat Oct 10, 2009 10:36 pm
- Bike owned: '88 NC23, NC30, '98 R1, NC35
Re: fuel tap leak
I think there should be a large diameter o-ring in there, as a temporary measure I think some plumbers PTFE tape might hold up for a bit, but would prefer to fix it properly first :)
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: fuel tap leak
Hi, well I have not been able to look into this yet, due to work but will hunt around for some PTFE tape tonight in the Plumbers maintainance room. A bloke at work said I could try some ThreeBond, looking around it seems to be just the job if I cant locate the source of the leak with a new washer.
thanks
thanks