wouldnt it be best to use both top and bottom .
also what about some on the forks .
i also would like to put some bobbins on the swing arm for the paddock stand how would one go about fitting them becouse there is no holes for them
frame sliders / crash bungs nc23
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
lloydiecbr
- Site Supporter
- Posts: 271
- Joined: Fri Dec 26, 2008 11:11 pm
- Bike owned: VTR1000
- Location: coventry
-
Wozza
- Site Supporter
- Posts: 629
- Joined: Wed Aug 06, 2008 9:51 pm
Re: frame sliders / crash bungs nc23
Top AND bottom, that might be overkill, but then when it comes to bike protection overkill might not be a bad thing. I think you'll have to drill and tap the swingarm to get bobbins in. You can get spindle sliders but I don't know if any fit the 23.